Going beyond traditional ways of managing stormwater

 

 

Rainwater is the primary source of water available to us. Naturally, some of the rain soaks directly into the soil which makes up the groundwater inside the surface of earth and is known as surface run-off water. In the absence of any receiving channel, this run-off ultimately flows into the rivers, streams or oceans. Managing this run-off water optimally, so that the collected water can be can be used, is known as stormwater management.  

All the traditional ways of managing stormwater are known as above-ground stormwater management systems. The traditional ways of detaining and retaining water demands the storage of water in open ponds/sewers. This system drains high peak flows away and dislocates substantial water loads to be put in at some other place.

In these systems, it is essential that you use proper filtration techniques and materials to make sure the quality of the water doesn’t suffer from polluted stormwater inflows.

If your goal is to reduce flooding due to stormwater runoff being too vast, there are different solutions available. All it requires is a bit of out-of-the-box thinking.

As stated at the start, in nature, stormwater seeps through the surface. So, instead of hard, impermeable surfaces, using porous surfaces and will help as well. In fact, combined with geocells (link), a whole range of new possibilities of stormwater management emerges.

An alternative solution is a subsurface stormwater system, which can provide an economical and appropriate alternative to an above-ground system.

If you want to learn more about underground stormwater solutions, click here

Not sure how you can optimize your Stormwater Solution?

REACH OUT TO AN EXPERT.