Further to the Shelter in Place measures issued to protect the health and safety of all Canadians and Americans from COVID-19, all Layfield locations will remain open as a listed essential workplace. We hope you are safe and doing well, and will continue to keep you updated with relevant information during this challenging time. If you have any questions, please be sure to call our customer service line at 1.800.840.2884.​

Higher Strength Low Slip Industrial Sheeting


HIGHER STRENGTH LOW SLIP
INDUSTRIAL SHEETING

PHYSICAL PROPERTIES

Nominal Gauge
Gauge Tolerance (+-%)
Yield (in2/lb)

1.38 mil
8 - 10
21,739

Property Typical Value (1) Unit Test Method
Haze 9.1 % ASTM D 1003
COF 0.29 ASTM D 1894
Dart Impact (F50) 172 Grams ASTM D 1709
Elmendorf MD Tear 372 Grams ASTM D 1922
TD Tear 916 Grams
MD Elongation 546 % ASTM D822
MD Break Energy 2.15 ft-lb. ASTM D822
TD Elongation 602 % ASTM D822
TD Break Energy 2.15 ft-lb. ASTM D822
 
 
  1. Typical values represent average laboratory values and are intended as guides only, not as specifications.
  2. Film properties are typical of blown film extruded at approximately a 2.5:1 blowup ratio.
  3. Properties designated have been determined in accordance with the current issues of the specified test methods.
 
 
 
A higher strength, low slip film designed for use in a multiple of applications. Manufactured from prime Octene polyethylene resins, this film can be engineered with additive packages to suit a variety of applications. Exceptional toughness and machinability.