PHYSICAL PROPERTIES
|
|
Nominal Gauge
Gauge Tolerance (+-%)
Yield (in2/lb)
|
1.6 mil
8 - 10
18,750
|
|
| Property |
Typical Value (1) |
Unit |
Test Method |
| Haze |
32.8 |
% |
ASTM D 1003 |
| COF |
0.21 |
|
ASTM D 1894 |
| Dart Impact (F50) |
>700 |
Grams |
ASTM D 1709 |
| Elmendorf MD Tear |
399 |
Grams |
ASTM D 1922 |
| TD Tear |
531 |
Grams |
|
| MD Elongation |
501 |
% |
ASTM D822 |
| MD Break Energy |
1.85 |
ft-lb. |
ASTM D822 |
| TD Elongation |
598 |
% |
ASTM D822 |
| TD Break Energy |
1.55 |
ft-lb. |
ASTM D822 |
| |
| |
- Typical values represent average laboratory values and are intended as guides only, not as specifications.
- Film properties are typical of blown film extruded at approximately a 2.5:1 blowup ratio.
- Properties designated have been determined in accordance with the current issues of the specified test methods.
|
| |
| |
| |
- A tough polypropylene film designed for use in Geomembrane applications at gauges of 10, 20, 30 and 40 mils. Its low slip characteristics improve handleability and tactile feel. Its high dart impact and tear strength resists puncturing.
|